可以從以下幾個方面對空壓機的冷卻系統進行優化。
The cooling system of the air compressor can be optimized from the following aspects.
通過改善壓縮機機房的通風條件，降低空壓機溫度。機械設備的工作環境，對機械設備使用有較大的影響，降低設備的溫度，可以減輕對設備帶來的不利影響。隨著機組使用年限的增加，機組發熱量也日益上升，原有的從進風道進氣來滿足產氣和冷卻機組的方式已不適用。如杭州卷煙廠通過將機組左右兩扇邊門改造成下進風的百葉形式，將環境溫度的空氣從設備下部吸入，再從上部的排風扇排出，有效降低機組溫度。該公司原有機組冷卻排氣直接排入排風通道，然后從屋頂排出，但由于機組排風風扇功率小。
Reduce the temperature of the air compressor by improving the
ventilation conditions in the compressor room. The working environment
of mechanical equipment has a significant impact on its use. Lowering
the temperature of the equipment can alleviate the adverse effects on
the equipment. As the service life of the unit increases, the heat
output of the unit also increases day by day. The original method of
feeding air from the inlet duct to meet the production and cooling needs
of the unit is no longer applicable. For example, Hangzhou Cigarette
Factory has transformed the left and right side doors of the unit into a
louvered form with downward air intake, which sucks in ambient
temperature air from the lower part of the equipment and then exhausts
it from the upper exhaust fan, effectively reducing the unit
temperature. The cooling exhaust of the original unit of the company is
directly discharged into the exhaust duct and then discharged from the
roof, but due to the low power of the unit exhaust fan.
通道內空氣換氣率不高，從而使得通道內溫度升高，影響機組冷卻。通過在排風通道口加裝排風扇泥桿 保定古箏 塑料增韌劑 拱形護坡模具 保定空調維修 托輥生產線，增加通道內空氣流速，增加通道內空氣換氣次數，從而使得機組冷卻效果提升。
The air exchange rate in the channel is not high, which increases the
temperature inside the channel and affects the cooling of the unit. By
installing an exhaust fan at the outlet of the air exhaust channel, the
air flow rate in the channel is increased, and the Air changes per hour
of the air in the channel is increased, thus improving the cooling
effect of the unit.
避免冷卻系統結垢。冷卻系統結垢是空壓機溫度異常產生故障的主要原因，其使冷卻水不能有效地與氣缸壁進行換熱，導致氣缸運行溫度升高而引發事故。了解決這一問題，國內外許多學者進行了大量的研究工作，并取得了一些研究成果。主要通過加強冷卻水水質的監控和管理，對冷卻水進行改造和定期對空壓機進行清洗等方法來避免冷卻系統結垢，其中對空壓機清洗除垢法包括是機械除垢法和化學除垢法等，因?yàn)闅飧姿椎慕Y(jié)構比較復雜，機械除垢法很難清除干凈，所以，目前的除垢方法以化學除垢法為主。
Avoid scaling in the cooling system. The scaling of the cooling system
is the main cause of abnormal temperature in the air compressor, which
prevents effective heat exchange between the cooling water and the
cylinder wall, leading to an increase in the operating temperature of
the cylinder and causing accidents. To solve this problem, many scholars
at home and abroad have conducted extensive research work and achieved
some research results. The main methods to avoid scaling in the cooling
system are to strengthen the monitoring and management of cooling water
quality, renovate the cooling water, and regularly clean the air
compressor. Among them, the cleaning and descaling methods for the air
compressor include mechanical descaling and chemical descaling. Due to
the complex structure of the cylinder water jacket, mechanical descaling
is difficult to clean, so the current descaling method is mainly
chemical descaling.